Electromagnetic heating industry has experienced a decade, due to high efficiency, energy saving and environmental protection, widely used. Now more and more enterprises begin to use electromagnetic heating instead of traditional resistance wire heating or gas heating, the following mold furnace, mold heating furnace, energy-saving mold furnace foshan gaoteng automation equipment co.

Load coil:

The load coil corresponds to the power of the electromagnetic heater, and it has a parameter called inductance. Different powers correspond to different inductance, and the length around xi 'an is different. Inductance is used (bridge), it with a series of different parameters change (winding density, distance of coil and the heating body, shape, etc.) so the coil is poor experience, in the absence of measuring instruments, see the working state of the machine to adjust the coil, slowly see is plus or minus coil, until adjusted to the appropriate working state.

Heater material:

At present, all the materials on the market are made of iron-containing materials, because the iron material is better, so the efficiency is higher. We have our own technology to heat the stainless steel, and the same can achieve better results.

The coil distance refers to the distance between the coil surface and the surface of the heated body. The distance cannot be too close or too far. Generally, it should be kept at 2cm.

The current refers to the input current of the electromagnetic heater, not the output current. The output current is high-frequency current. The output current of the ordinary clip current meter is 2-3 times of the input current. If you know the current, you can use the formula to calculate the actual power.

The operating frequency refers to the power of the electromagnetic heater at full power.

Electromagnetic heating is widely used, there is no low temperature limit of air source technology, there is no high temperature limit of resistance heating.

We are not only doing electromagnetic heating company, we are also for your cost savings company, the choice is very important, believe in us is to believe in yourself.